10 Ultimate Tips for Sewing Embroidered Mesh Fabric

Even the most experienced designers find sewing embroidered mesh fabric a little intimidating. How can you sew so many holes together? However, a little technical guidance can make the process very easy. These techniques can be applied to any project. But, before we discuss the sewing technique, let’s first understand what mesh fabric exactly is.

Mesh Fabric

Embroidered mesh fabriccomes in a variety of weights and types. It can be used for so many things such as sportswear, bridal wear, and other purposes.

Mesh is a loosely woven fabric, generally made with polyester or nylon. It can even be made from materials like metal and rope for some industries. It comes with uniform holes throughout the surface that can vary in size depending upon the kind of mesh. Polyester is a synthetic material that ensures that the fabric is strong and can survive wear & tear during usage. It keeps the fabric flexible despite its extreme strength.

Due to holes on the surface, it is breathable no matter what material it is made of. It can also be embroidered to enhance the appearance. It comes with a soft finish and light stretch due to holes in the fabric. And it dries really quickly.

Tips for Sewing Embroidered Mesh Fabric

1. Needle choice

Mesh fabric can be extremely slippery whether it is embroidered or not. So, a good needle choice can make the process easier. Choose a needle that can slide between the fibers rather than piercing them. Universal machine needles of sizes 70/10 to 80/12 can work perfectly.

2. Thread

Use the thread which matches the fiber of the mesh. For most types of mesh, a polyester thread would be the best. It can help make strong stitches for any kind of item you want to make.

3. Cutting

When it comes to cutting the mesh fabric, you can use scissors. However, the rotary cutter and a mat would be best to make fine cuts.

4. Marking

Use erasable pens, chalk, or clips with small scissors.

5. Pinning

Because of the holes and slippery nature of the fabric, quilting clips would be a better choice rather than pins. Alternatively, you can use extra fine pins which will be better than regular pins.

6. Machine’s feet

You can use a walking foot to help guide the mesh and a tear-away stabilizer or something like tissues or papers under the seam that can be ripped off after the sewing. A wide straight stitch foot or roller foot can also be used.

7. Sewing speed

Try to maintain a steady pace while sewing and don’t pull the mesh through the machine as this helps to avoid gather or puckers.

8. Stitch length

Use short and a straight stitch of 1.75 to 2.5 mm or you can also use a narrow zig-zag stitch.

9. Fabric position

Always make sure to keep the mesh layer on top next to the needle to prevent slipping or getting trapped.

10. Basting

The less you handle and sew the fabric the better it feels to stitch. Avoid basting the mesh wherever possible. Instead of that, you can use temporary glue or double side tape.

Ending note

Hope this blog has helped you in sewing embroidered mesh fabric. If you are looking to buy embroidered mesh fabric online, check out the best collectionat our website now.